r = 0.79), Sindh (r = 0.91), Khyber Pakhtunkhwa (KPK) (r = 94) and Islamabad (r = 0.85). Findings showed that major NPI and lockdowns especially have had a large effect on minimizing transmission. Continued community intervention should be undertaken to keep transmission of SARS-CoV-2 under control in cities where higher incidence of COVID-19 cases until the vaccine is available. This study provides a methodological framework that if adopted can assist epidemiologist and policy makers to be well-prepared in advance in cities where PM2.5 concentration and NO2 levels are already high in order to minimize the potential risk of further spread of COVID-19 cases.Recently, bio-drying was highlighted in the drying pretreatment of high-moisture organic wastes for their energy recovery. In this study, to investigate the influences of thermal assistance on microbial stimulation and energy utilization in organic degradation, thermally assisted bio-drying (TB) was conducted on food waste (FW) and was compared with conventional bio-drying (CB) and thermal drying (TD). As expected, more water was removed in TB, which exhibited no lag phenomenon and intensified microbial activity. Corresponding with the stimulated enzyme activity, more readily degradable carbohydrates, lipids and lignocellulose were decomposed in TB than those in CB, and lipid degradation generated a significant proportion of the total bio-heat generated (43.13%-45.83%). Furthermore, according to the microbial analysis (qPCR and 16S rRNA gene sequencing), Bacillus was found to be the dominant genus involved in the degradation of organics during TB and CB. In the initial phase, rather than Weissella, as in CB, Ureibacillus was notable in TB for the degradation of readily degradable substrates. https://www.selleckchem.com/products/tak-981.html In the late phase, Pseudoxanthomonas and Saccharomonospora were enriched for degrading lignocellulose. In addition, heat balance and life-cycle energy assessment demonstrated that a small amount of thermal heat (11.96%) upgraded bio-drying with high energy efficiency. Compared with the CB and TD processes, the TB trial consumed less thermal energy (0.58 MJ/kg H2O) and achieved a higher energy output/input ratio (3.64). This research suggests that thermal assistance is a promising approach to enhancing FW bio-drying, which exhibits efficient drying performance and great potential for energy recovery.Human activities are the leading cause of environmental impairments. Appropriate biomonitoring of ecosystems is needed to assess these activities effectively. In freshwater ecosystems, periphytic and epilithic biofilms have diatom assemblages. These assemblages respond rapidly to environmental changes, making diatoms valuable bioindicators. For this reason, freshwater biomonitoring programs are currently using diatoms (e.g., Water Framework Directive). In the past ten years, DNA metabarcoding coupled with next-generation sequencing and bioinformatics represents a complementary approach for diatom biomonitoring. In this study, this approach is used for the first time in Cyprus by considering the association of environmental and anthropogenic pressures to diatom assemblages. Statistical analysis was then applied to identify the environmental (i.e., river types, geo-morphological) and anthropogenic (i.e., physicochemical, human land-use pressures) variables' role in the observed diatom diversity. Results indicate differences in diatom assemblages between intermittent and perennial rivers. Achnanthidium minutissimum was more abundant in intermittent rivers; whereas Amphora pediculus and Planothidium caputium in perennial ones. Additionally, we could demonstrate the correlation between nutrients (e.g., nitrogen, phosphorus), stations' local characteristics (e.g., elevation), and land use activities on the observed differences in diatom diversity. Finally, we conclude that multi-stressors and anthropogenic pressures together as multiple stressors have a significant statistical relationship to the observed diatom diversity and play a pivotal role in determining Cyprus' rivers' ecological status.Per- and poly-fluoroalkyl substances (PFAS) represent a large family of anthropogenic organic compounds with a wide range of industrial and commercial applications. PFAS have become a global concern due to their toxicity and bio-accumulative properties. PFAS species have been ubiquitously detected in natural waters, wastewaters, sludge, and aquatic and terrestrial species which are anionic, zwitterionic and neutral. The ion exchange (IX) process for PFAS removal is an efficient technology for the remediation of PFAS-laden surface, ground and effluent wastewaters. This approach is more effective towards eliminating emerging short-chain PFAS which are not removed by carbon-based adsorption processes. This article presents a state-of-the-art review of PFAS removal from water via IX process. The evaluation and comparison of various IX resins in terms of kinetics and isotherms is presented. Literature data indicates that IX isotherm uptake capacity for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) can range up to 5 mmol/g on commercially available IX resins such as IRA 958 and IRA 67. The mechanism involved in the PFAS uptake process, such as diffusion, electrostatic interactions and hydrophobic effects are discussed. The effects of the eluent variability on the regeneration efficacy are also highlighted and the effect of single-use vs reuse for newly developed PFAS-specific IX resins are also examined based on the reviewed literature.Microplastics in atmospheric fallouts from a developing megacity influenced by a tropical monsoon climate were investigated during a year. Three sites were selected according to the surrounding population density, the land use and occupation. The microplastic deposition fluxes varied between of 71-917 items m-2 d-1, for an observation size range of 300-5000 μm. Fibers predominated while fragments were observed occasionally. Unexpectedly, contrary to available scientific literature, deposition fluxes did not vary temporally with rainfall and wind intensity or direction, showing no effect of the tropical climate. Variations were observed between sites and were attributed to their environmental characteristics population density and occupation space. The median length of fibers also differed between sites and could be related to in-situ fragmentation processes due to occupation space (solid waste treatment facility). Those first results from tropical climate region are showing interesting insights and are opening new perspectives on the understanding of microplastics fate from atmospheric fallouts.